Endurance Championship - R2: Fuji - 18th March 2018 (2 Viewers)

Status
Not open for further replies.

AndrexUK

Active Member
Community Member
Joined
Jun 16, 2017
Messages
141
Reaction score
76
Yeah, that ICM system...
Have to agree. And it always auto closes too quickly.
You have to have a decent straight to be able to spend time on it.
Had to reduce my fuel from 100L to 60 (since It was using 90L per hour, and i started on 130, but didn't want to be too accurate on the refuel amount without confirming in race first, so played very save with adding 100, and reduce during race).
Away from the long straight, (I was doing my maths on the straight....) It's a nightmare to change something even as simple as dropping 40L of fuel (about as simple as it gets).
If you do it going into a series of corners, it auto closes due to no change over time, then you have to open it again, and navigate to the right part and so on.....
Would rather it stayed open till i tell it to close, or at least have a 1 min 'remain open' time.

And very limited when changing your tire options (in terms of maybe not changing the rear's / adjusting your tire pressures.)

It does feel rather 'un-polished'
 

miagi

Senior Member
Community Member
Joined
Feb 15, 2017
Messages
778
Reaction score
569
Yeah, that ICM system...
Have to agree. And it always auto closes too quickly.
You have to have a decent straight to be able to spend time on it.
Had to reduce my fuel from 100L to 60 (since It was using 90L per hour, and i started on 130, but didn't want to be too accurate on the refuel amount without confirming in race first, so played very save with adding 100, and reduce during race).
Away from the long straight, (I was doing my maths on the straight....) It's a nightmare to change something even as simple as dropping 40L of fuel (about as simple as it gets).
If you do it going into a series of corners, it auto closes due to no change over time, then you have to open it again, and navigate to the right part and so on.....
Would rather it stayed open till i tell it to close, or at least have a 1 min 'remain open' time.

And very limited when changing your tire options (in terms of maybe not changing the rear's / adjusting your tire pressures.)

It does feel rather 'un-polished'
Also we can't move the ICM with the HUD Adjustment tool. Because why would anyone want to move a Menu that is hidden by the steering wheel.
 

Col_McCoy

Active Member
#TeamRSR
Joined
Sep 17, 2016
Messages
228
Reaction score
185
Yeah @miagi I'm very sorry for taking the fight between us out of the occasion with such a huge mistake.
I was watching our gap lap after lap and saw it was so steady, I knew I had to make most out of my pitstop strategy and save whereever time was possible.
Hopefully more luck next time!
 

Darksi

Manager of RSR
Staff
#TeamRSR
Joined
Feb 8, 2017
Messages
1,037
Reaction score
1,007
For everyone having issues with the ICM, there is this option. It looks pretty cumbersome to set up and I have no idea how well it works in reality. I may try it out. You have to purchase voiceattack which is €8. If I end up getting it, I'll report back on my findings.

http://forum.projectcarsgame.com/showthread.php?54642-Quick-way-to-navigate-ICM(in-car-menu)

I am actually running this already in Pcars2 and other games and have to say it works really well.
 

1185323118

Well-Known Member
#TeamRSR
Joined
Feb 6, 2017
Messages
361
Reaction score
226
Thanks for uploading - I remember that moment in the race and just hoped you guys in the GT3 would slow @IJerichoI down enough for me to try the overtake through traffic ;)
It was scary for a moment. I didn't see you two coming from behind, then Sebastian came out of no where on my outside mid-corner, nearly lost it XD
but you guys battled for a very long time though, how didn't you get pass him
 

CatchAGlimpse

Senior Member
#TeamRSR
Joined
Feb 6, 2018
Messages
566
Reaction score
884
It was scary for a moment. I didn't see you two coming from behind, then Sebastian came out of no where on my outside mid-corner, nearly lost it XD
but you guys battled for a very long time though, how didn't you get pass him
It was scary for us too - approaching 3 battling GT3s hoping all 3 will see there are two of us LMP2s coming through.

I think myself and Seb were so closely matched, only mistakes were going to decide who came out on top. One of the best battles I've had with RSR so far :)

Great racing mate! Any idea what lap this was on? I have the replay so wanted to check it out myself?
 

IJerichoI

New Member
Community Member
Joined
Sep 5, 2017
Messages
13
Reaction score
7
It was scary for a moment. I didn't see you two coming from behind, then Sebastian came out of no where on my outside mid-corner, nearly lost it XD
but you guys battled for a very long time though, how didn't you get pass him

Oh, I call this the moment of the race for me. I couldn't afford losing too much time and went for it, knowing the menace behind me ;-) very thight one indeed.

It was 33 mins mins to go. I had the same thoughts, and it was a great battle for the remaining half hour.
 
Last edited:

CatchAGlimpse

Senior Member
#TeamRSR
Joined
Feb 6, 2018
Messages
566
Reaction score
884
Here it is from my view and I've included some extra for the battle for 3rd over a few laps. I have an incident right at the end of the video with a GT3 which meant I had to do the catch up all over again for our battle to continue!


Note: It is 1080p, may have to wait for it to finish processing
 

IJerichoI

New Member
Community Member
Joined
Sep 5, 2017
Messages
13
Reaction score
7
Hi folks, just want to know when the results will be online?
 

IJerichoI

New Member
Community Member
Joined
Sep 5, 2017
Messages
13
Reaction score
7

m4nu

Head of RSR
Staff
#TeamRSR
Joined
Aug 2, 2016
Messages
6,205
Reaction score
5,642
They are literally done, just need to adjust 2 little things in the standings sheet. Sorry for the delay, hopefully I can push the results out tonight :)
 

m4nu

Head of RSR
Staff
#TeamRSR
Joined
Aug 2, 2016
Messages
6,205
Reaction score
5,642
Status
Not open for further replies.

Users who are viewing this thread

Top