Project CARS 2 Fanatec Clubsport V3 Pedals Vibration (1 Viewer)

CrisBCros · Oct 18, 2017

Hi guys

Is there anyone who can assist me in the configuration of my new set of Fanatec Clubsport V3 Pedals. They are workling good so far, but the vibration on throttle and brake does not work in-game.
Latest driver and firmware installed, pedals are rumbling in fanatec properties program.

PLEASE HEEEELP...

Dutchtastic · Oct 18, 2017

I assume that you do not have a fanatec base, in that case no worries!
Go to http://www.fanaleds.com/ and download the program which is mostly used for the fanatec rims and LED displays. It should automatically activate the vibration in both pedals. (on iRacing that is)

I've only just gotten my V3's (since monday) so I still have to figure out quite a bit myself.

Gopher04 · Oct 18, 2017

I beta test for them, the version that is officially out might not give you the vibration since the patch, the new beta does but they can't release yet as their trying to sort out F1 2017 as well, and they only seem to work on it a couple of hours a week so it's slow progress.

CrisBCros · Oct 18, 2017

Thank you both for your reply. Means that it‘ll even not work with FanaLEDs ?

Gopher04 · Oct 18, 2017

CrisBCros said:
Thank you both for your reply. Means that it‘ll even not work with FanaLEDs ?

Your just have to try, can't remember if the current version works or not on the pedals, I know it didn't on displays and dashes.

CrisBCros · Oct 18, 2017

Can you tell me what I need to set up in FanaLEDs ? I will give it a try

Dutchtastic · Oct 18, 2017

CrisBCros said:
Can you tell me what I need to set up in FanaLEDs ? I will give it a try

I installed Fanaleds and the vibration settings were already on.

CrisBCros · Oct 18, 2017

Dutchtastic - how did you plug them in ?

Dutchtastic · Oct 18, 2017

CrisBCros said:
Dutchtastic - how did you plug them in ?

I have the V3's plugged in via USB

These are my current settings, still playing with threshold
Turned off all base settings since mine isn't Fanatec, so it runs through Logitech app

CrisBCros · Oct 18, 2017

aah - but you are running iRacing...? I am trying to use with pcars 2

Dutchtastic · Oct 18, 2017

CrisBCros said:
aah - but you are running iRacing...? I am trying to use with pcars 2

Yeah, but it should also work on pCars2
If not, then I'd recommend asking from some intel on the WMD forums.

CrisBCros · Oct 19, 2017

I need to try again - yesterday I was not able to get it working. WMD forum is not available to join at the moment...

Puffpirat · Oct 19, 2017

I have my v3s connected via USB and the vibration is working in pc2. I do have a CSW v2.5 and therefore the fanatec drivers installed though

Cluck · Oct 19, 2017

Fanatec V3 pedals, without other Fanatec gear, do not provide pedal vibration. Doesn't work in pCARS1, doesn't work in pCARS2 either. There are multiple reports of it, not least from myself. Fanaleds has been suggested in the past, I've just never tried it - to be honest, I've never had the pedal vibration so I'm not missing it

.

CrisBCros · Oct 19, 2017

@Puffpirat Could you share your method of installation - or could you even assist?

@Cluck Some say it's working, some not - what can I trust? Quite confusing...

Gxbbs · Oct 19, 2017

CrisBCros said:
@Puffpirat Could you share your method of installation - or could you even assist?

@Cluck Some say it's working, some not - what can I trust? Quite confusing...

What wheel base have you got?

CrisBCros · Oct 19, 2017

I have the Thrustmaster T300

Gxbbs · Oct 19, 2017

CrisBCros said:
I have the Thrustmaster T300

There’s your problem. Because you haven’t got a fanatec base it sounds like the driver for the pedal vibrations come from the wheel base which is why yours isn’t working straight away. But as for fanaleds I don’t have a clue.

Dutchtastic · Oct 19, 2017

Gxbbs said:
There’s your problem. Because you haven’t got a fanatec base it sounds like the driver for the pedal vibrations come from the wheel base which is why yours isn’t working straight away. But as for fanaleds I don’t have a clue.

FanaLEDs is the work-around for the Fanatec base
But as Cluck said, there have been a lot of reports the vibration doesnt work on pCars.

CrisBCros · Oct 19, 2017

Puffpirat said:
I have my v3s connected via USB and the vibration is working in pc2. I do have a CSW v2.5 and therefore the fanatec drivers installed though

But why is it then working for @Puffpirat ?

Project CARS 2 Fanatec Clubsport V3 Pedals Vibration (1 Viewer)

Active Member

Senior Member

Gopher04

Guest

Active Member

Gopher04

Guest

Active Member

Senior Member

Active Member

Senior Member

Active Member

Senior Member

Active Member

RSR Family

Super Moderator

Active Member

Senior Member

Active Member

Senior Member

Senior Member

Active Member

Users who are viewing this thread